TEX-E, TEX-ECEW3, TEX-ELZ

As of April 12, 2011

Organization Requirements
Standard No.*1		 Cert. No. Rating Model: UL Style No.
UL UL 2353
UL 1950-3e/IEC 60950, Annex U
(UL 1411?UL 60950-1)		 E206440
OBJT2
(E188643,AVLV2)*2
(E157568,OCDT2)*2		 1000 Vrms
TEX-E
B(130°C)*3TEX-ELZ,
TEX-ECEW3
E(120°C)		 TEX-E (Style 10348)*2
TEX-ELZ (Style 10349)*2
TEX-ECEW3(Style 10389)*2
CSA
(NRTL/C)		 CAN/CSA 60065-03 incl. AM1
ANSI/UL std No. 60065-2007
CAN/CSA-C22.2 No. 60950-1-07
ANSI/UL std No. 60950-1-2007		 Master Contract
185274*4(LR104155)		 1000 Vrms
120°C(E)		 TEX-E
TEX-ELZ
TEX-ECEW3
TUV
Rheinland		 EN 60950-1:2006+A11,
IEC 60950-1:2005
DIN EN 60950-1:2006+A11
EN 60065:2002+A1+A11
IEC 60065:2001+A1		 T9251520 1000 Vrms
TEX-E
B(130°C)TEX-ELZ,
TEX-ECEW3
E(120°C)		 TEX-E
TEX-ELZ
TEX-ECEW3
BSI BS EN 60065:2002,
IEC 60065:2001
Subclauses 14.3.4/14.3.5 (8.8 and 8.17), 10.3 and Annex H; and 20.1.4
BS EN 60950-1:2006,
IEC 60950-1:2005
Subclause 2.9.1 (with 2.9.2 and 5.2.2) and 2.10.5.12 (Annex U); and 4.7.3.4 (A.2 excluding A.2.4, but including A.2.7)		 KM 36738 1000 Vrms
120°C		 TEX-E
NEMKO Annex U of EN 60950-1:2006; A11 and Annex H of EN 60065:2002; A1; A11 P10212368 1000 Vrms
E(120?)		 TEX-E
TEX-ELZ
TEX-ECEW3
VDE DIN EN 60950-1:2006
+A11 (VDE0805Teil1+A11):
2009-11;
EN60950-1:2006+A11:2009-03, IEC60950-1 (ed.2)		 VDE-Reg.-Nr.6735 1000 Vpeak
700 Veff
Max. 500kHz
Class E and B		 TEX-E
  1. TEX-E series are the insulated winding wire having Reinforced Insulation complying with subclause 2.10.5.4, Annex U of IEC 60950 3rd, IEC 60950-1 and subclause 8.17, Annex H of IEC 60065 7th. Normal Withstand Test Voltage is 3kVrms for 1 minute. TEX-E series also complies with 6kVrms for 1minute as a twisted pair.
  2. UL changed the category of TEX-E series from OCDT2, AVLV2 to OBJT2. Therefore, TEX-E wires acquired new UL File No and the category. The product covered by E206440 (OBJT2) is quite the same as the product covered by E157568 (OCDT2) and E188643 (AVLV2). These product can be used compatibly each other.
  3. When operation temperatures of the wound components exceed Class A (105°C), it is required in accordance with appropriated Insulation System UL 1446/IEC 61857 regardless of temperature rating of each materials/wires.
  4. Numbering system of CSA was revised at 2000. Legacy File number is compatible.

Note

TEX-E: Standard type, TEX-ELZ: Litz wire type, TEX-ECEW3: Self-bonding type